Double Flare Vs Bubble Flare
Double flare vs bubble flare is a common debate among DIYers and professionals working with metal tubing. This guide breaks down each flare type, compares their pressure resistance, ease of installation, and tool needs, and helps you pick the best option for brake lines, fuel lines, or exhaust work.
When you’re working with metal tubing—whether it’s for a brake line, fuel line, or custom exhaust—you’ll inevitably need to create a flare. A flare is that widened end of the tube that allows a fitting to seal tightly and resist pressure. Two of the most popular flare styles are the double flare and the bubble flare. Each has its own strengths, weaknesses, and ideal use cases. In this article we’ll walk you through what each flare looks like, how it’s made, where it shines, and how to decide which one is right for your project. By the end you’ll have a clear picture of the double flare vs bubble flare debate and the confidence to pick the best option every time.
Key Takeaways
- Double flare creates a stronger, more pressure‑resistant joint by folding the tube wall back on itself twice, making it ideal for high‑pressure brake and fuel systems.
- Bubble flare forms a simple, rounded bulge that is quicker to produce and works well for low‑to‑moderate pressure applications like certain exhaust or coolant lines.
- Tool requirements differ significantly; double flaring needs a specialized double flaring tool, while bubble flaring can often be done with a basic flaring kit or even a hammer and die.
- Material and tubing size influence the choice; softer metals like copper or aluminum bubble flare easily, whereas harder stainless steel benefits from the double flare’s added strength.
- Proper preparation and inspection are critical for both flare types to avoid leaks, cracks, or failure under pressure.
📑 Table of Contents
What Is a Flare?
Before we dive into the specifics, it helps to understand what a flare actually does. When you flare a tube, you expand the end outward so that a nut or fitting can slide over it and clamp down, creating a metal‑to‑metal seal. This seal is far more reliable than a simple slip‑on connection, especially when the line carries fluid or gas under pressure. The quality of the flare directly affects safety, durability, and ease of maintenance.
Single Flare Overview
A single flare is the most basic form: the tube end is expanded outward once, forming a conical shape. It’s quick to make but offers limited resistance to pull‑off forces and can crack under high pressure. Because of these limitations, single flares are rarely used in critical automotive systems today.
Why Flare Matters
A well‑formed flare distributes stress evenly around the tube’s circumference. It also provides a mechanical lock that keeps the fitting from vibrating loose. In brake lines, for example, a failed flare can lead to fluid loss and loss of braking power—something no driver wants to experience. That’s why choosing the right flare type and executing it correctly is so important.
Understanding Double Flare
The double flare, sometimes called a double‑lap flare, takes the tube through two distinct forming steps. First, the tube is flared outward like a single flare. Then, the flared edge is folded back onto itself, creating a second layer that reinforces the joint. The result is a thick, sturdy lip that can handle significantly higher pressures.
How Double Flare Is Made
To make a double flare you need a double flaring tool—often a set of dies that match the tube’s outer diameter. The process starts by clamping the tube in the tool’s bar, then advancing the cone to create the initial flare. After releasing the pressure, you rotate the tube 90 degrees (or use the tool’s second stage) to fold the flare back onto itself. The final shape looks like a rolled‑over lip that sits flush against the fitting face.
Advantages of Double Flare
The biggest advantage is strength. Because the tube wall is effectively doubled at the flare, the joint can withstand pressures that would cause a single or bubble flare to deform or leak. Double flares also resist cracking better, especially in harder materials like stainless steel or hardened steel lines. Additionally, the double flare provides a larger sealing surface, which helps achieve a tighter, more reliable seal with less torque on the fitting nut.
Common Applications
Double flares are the go‑to choice for high‑pressure hydraulic and pneumatic systems. You’ll find them on:
– Automotive brake lines (both front and rear)
– Fuel injection lines and high‑pressure fuel rails
– Power steering lines
– Custom hydraulic manifolds
– Industrial pneumatic tubing where safety is paramount
Understanding Bubble Flare
A bubble flare, sometimes called a “ball flare” or “bubble‑type flare,” is simpler. Instead of folding the flare back, you expand the tube end outward until it forms a rounded bulge that looks like a small bubble or bead on the end of the tube. The shape is smooth and continuous, with no sharp folds.
How Bubble Flare Is Made
Creating a bubble flare can be done with a basic flaring kit that includes a cone die and a yoke. You clamp the tube, then advance the cone until the tube wall stretches outward into a bubble shape. Some mechanics even use a hammer and a specially shaped die to tap the tube into a bubble flare, though this method requires more skill to avoid thinning the wall excessively.
Advantages of Bubble Flare
The primary advantage is speed and simplicity. Because you only need one forming step, you can produce a bubble flare in a fraction of the time it takes to make a double flare. The process also tends to work well with softer metals like copper, brass, and aluminum, which stretch easily without cracking. Tooling for bubble flares is generally less expensive and more widely available, making it a good option for hobbyists or occasional repairs.
Common Applications
Bubble flares are commonly seen in:
– Low‑pressure coolant and heater lines
– Vacuum lines and emissions tubing
– Certain exhaust system sections where pressure is modest
– Aftermarket fuel lines for low‑pressure carbureted setups
– Prototyping and hobby projects where ease of fabrication outweighs extreme strength needs
Double Flare Vs Bubble Flare: Key Differences
Visual guide about Double Flare Vs Bubble Flare
Image source: rtsauto.com
Now that we know how each flare is made and where they’re typically used, let’s compare them head‑to‑head across several important factors.
Strength and Pressure Handling
When it comes to raw strength, the double flare wins. The double‑layered lip distributes load over a larger area and resists deformation under high internal pressure. In brake line testing, double flares routinely hold up to 2,000 psi or more, whereas bubble flares may start to leak or deform around 800‑1,200 psi depending on material and wall thickness. If your system sees spikes above 1,500 psi, a double flare is the safer bet.
Ease of Installation
Bubble flares are quicker to produce, which can be a big advantage when you’re working on a tight schedule or need to make many flares in a row. The single‑step process means less handling of the tube and fewer chances to introduce contamination. Double flares require an extra step and careful alignment of the tube in the second stage, which adds a bit of time and demands more attention to detail.
Tool Requirements
To make a proper double flare you need a dedicated double flaring tool—often sold as a kit that includes multiple dies for different tube sizes. These tools can be pricier, but they deliver consistent results. For bubble flares, a standard single‑flare kit (cone and yoke) is usually sufficient, and many hobbyists already own one. If you already have a double flaring tool, you can use it to make bubble flares as well by simply stopping after the first stage, but the reverse isn’t true: a bubble‑flare‑only setup won’t give you a true double flare.
Cost Comparison
Because double flaring tools are more specialized, they tend to cost more upfront. However, if you frequently work on high‑pressure systems, the investment pays off in reliability and reduced rework. Bubble flare setups are cheaper and more accessible, making them attractive for occasional repairs or low‑stress applications.
Choosing the Right Flare for Your Project
Visual guide about Double Flare Vs Bubble Flare
Image source: chevygeek.com
Selecting between a double flare and a bubble flare isn’t just about strength; it’s about matching the flare to the specific demands of your line.
Factors to Consider
Start by asking yourself these questions:
– What pressure will the line see? (Check manufacturer specs or measure with a gauge.)
– What material is the tube? (Stainless steel benefits from double flare; copper and aluminum often bubble flare easily.)
– What tube diameter and wall thickness are you working with? (Thicker walls can handle more deformation, but thin‑walled tubing may crack if over‑flared.)
– How critical is the connection? (Brake and fuel lines demand the highest reliability.)
– What tools do you already own? (If you have a double flaring tool, you have the flexibility to make either type.)
Step‑by‑Step Guide to Making Each Flare
While a full tutorial is beyond the scope of this article, here’s a quick overview to help you visualize the process.
Double Flare:
1. Cut the tube to length and deburr the inside and outside edges.
2. Clamp the tube in the double flaring tool’s bar, aligning it with the appropriate die.
3. Advance the cone to create the initial flare (first stage).
4. Release the pressure, rotate the tube 90° (or engage the tool’s second stage), and advance the cone again to fold the flare back onto itself.
5. Inspect the flare for uniform thickness and any cracks.
Bubble Flare:
1. Prepare the tube the same way—cut and deburr.
2. Clamp the tube in a standard flaring yoke with the cone die.
3. Advance the cone steadily until the tube wall forms a smooth bubble shape.
4. Release the pressure and remove the tube.
5. Check for even wall thickness and ensure the bubble is concentric.
Tips for Success
– Always lubricate the tube and die lightly with cutting oil to reduce friction and prevent galling.
– Make sure the tube is perfectly square in the clamp; any tilt will produce an uneven flare.
– For double flares, verify that the second stage fully folds the flare without pinching or tearing the metal.
– After flaring, clean the end with a lint‑free cloth to remove debris before assembling the fitting.
– Pressure‑test the completed line (using air or inert gas) at 1.5× the expected operating pressure to catch any weaknesses early.
Maintenance and Troubleshooting
Even the best‑made flare can develop issues over time, especially if it’s exposed to vibration, corrosion, or improper installation.
Inspecting Flares
Periodically check the flare face for signs of cracking, deformation, or corrosion. A visual inspection under good light is often enough; you can also use a magnifying glass for small hairline cracks. If you notice any distortion, it’s safer to replace the section rather than risk a failure.
Common Issues and Fixes
– **Leaking at the fitting:** This often means the flare isn’t seating fully. Remove the fitting, re‑inspect the flare, and ensure it’s clean and round. If the flare is damaged, cut off the section and re‑flare.
– **Cracking under pressure:** Usually caused by over‑flaring or using a tube that’s too thin. Switch to a thicker‑walled tube or reduce the flare depth.
– **depth** on your tool.
– **Flare slipping off the fitting:** Indicates insufficient flare angle or diameter. Verify you’re using the correct die size for your tube’s OD.
– **Corrosion buildup:** Especially common on steel lines in wet environments. Apply a light coat of anti‑corrosion spray and consider upgrading to stainless steel or coated tubing.
Conclusion
Choosing between a double flare and a bubble flare ultimately comes down to the demands of your specific application. If you’re working on high‑pressure brake, fuel, or hydraulic lines where safety and reliability are non‑negotiable, the double flare’s extra strength and sealing surface make it the clear winner. On the other hand, for low‑pressure coolant, vacuum, or exhaust projects where speed, ease, and cost matter more, a bubble flare gets the job done quickly and effectively.
Remember that the right tools, proper preparation, and careful inspection are just as important as the flare type itself. Whether you’re reaching for the best double flaring tool for stainless steel tubing or simply using a standard flare kit with a quality double‑sided tape for car exterior to hold the tube steady while you work, taking the time to do it right will save you headaches down the road. Now that you understand the double flare vs bubble flare debate, you can approach your next tubing project with confidence and the knowledge to make a safe, durable connection every time.
Frequently Asked Questions
What is the main difference between a double flare and a bubble flare?
The main difference lies in how the tube end is formed. A double flare creates a two‑layered lip by folding the flare back onto itself, giving it extra strength. A bubble flare forms a single, rounded bulge without any fold, making it quicker to make but less resistant to high pressure.
Can I use a bubble flare on a brake line?
It is not recommended. Brake lines see high pressure and require a flare that can withstand sudden spikes without leaking or cracking. A double flare provides the necessary strength and sealing surface for safe brake system operation.
Do I need a special tool to make a double flare?
Yes. A proper double flare requires a double flaring tool that can produce both the initial flare and the second fold. Using a standard single‑flare kit will not give you a true double flare and may result in an unsafe joint.
Is a bubble flare easier to make for a beginner?
Generally, yes. Because it only needs one forming step, a bubble flare can be produced faster and with less chance of error. Beginners often find it easier to master before moving on to the more involved double flare process.
What materials work best with each flare type?
Softer metals like copper, brass, and aluminum bubble flare easily and are often used in low‑pressure lines. Harder materials such as stainless steel or hardened steel benefit from the double flare’s added strength and are best suited for high‑pressure applications.
How can I test a flare to make sure it’s good?
After assembling the fitting, pressurize the line with air or an inert gas to about 1.5 times the expected operating pressure. Check for leaks at the fitting and inspect the flare for any signs of deformation or cracking. If it holds pressure without leaking, the flare is likely sound.
